CVR-CFP-100G CFP to QSFP28 Converter Module
Aug 13, 2021100G CFP to QSFP28 Adaptor Module is designed for 100Gigbit Ethernet and OTU4 links to deploy QSFP28 transceiver modules on equipment with CFP ports. With the adaptor module, customers have the flexibility to use either CFP or QSFP28 module on a CFP port of a switch. This flexibility is important when the specific type of interface is not available or customers want to use the same form of factor for interfaces across multiple platforms deployed in their network. For 100G Ethernet, reference clock can switch 161.133mhz or 644.531mhz, reference clock can switch 174.703mhz or 698.812mhz.
Read More >>>FEC (forward error correction)
Mar 08, 2022FEC ( forward error correction ) is used for correct errors in data transmission. The idea is the sender encodes the message with redundant information in the form of an ECC ( error correcting code). The redundancy allows the receiver to detect a limited number of errors that may occur in the message, and often to correct these errors without re-transmission. This function has become increasingly important in optical fiber communication systems to meet growing demand of higher bandwidth and longer transmission distance for telecom operators and system integrators
Read More >>>100G QSFP28 ZR4
Nov 08, 2021QSFP-100G-ZR4 optical transceiver module is designed for 100 Gigabit Ethernet links up to 80km over single-mode fiber 9/125um with duplex LC connector. This module is base on 4 channel LSN-WDM, contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial interface. Each channel rate is 25.78Gbps, Tx use EML TOSA, receiver side adopt SOA+PIN+ROSA+PCBA design, Tx power from 2dBm to 6.5dBm, Rx sensitivity≤ -29dBm. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4 standard. This module can support FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link. Digital diagnostics functions are also available via the I2C interface, to allow access to real-time operating parameters. It is suitable to be used in various applications, such as 100G Ethernet, 112G OTN OTU4, telecom, access network and data center interconnections.
Read More >>>What is QSFP28 Module and how many types of it?
Aug 16, 2021QSFP28 (Quad Small Form-Factor Pluggable SFP28). It integrates 4 channel lanes 25~28G transmit and receiver signals together to support 100G bandwidth. As the increasing demand of higher and faster speed, 100G transceiver modules is a good choice for Internet Service Providers, Mobile Operators and Data Centers. Compact and hot pluggable, compliant with QSFP28 MSA. Digital diagnostics Monitor are available via the I2C interface to read transceiver real-time operating parameters.
Read More >>>CVR-CFP2-100G CFP2 to QSFP28 Converter Module
Aug 13, 2021100G CFP2 to QSFP28 Adaptor Module is designed for 100Gigbit Ethernet and OTU4 links to deploy QSFP28 transceiver modules on equipment with CFP ports. With the adaptor module, customers have the flexibility to use either CFP2 or QSFP28 module on a CFP2 port of a switch. This flexibility is important when the specific type of interface is not available or customers want to use the same form of factor for interfaces across multiple platforms deployed in their network. For 100G Ethernet, reference clock can switch 161.133mhz or 644.531mhz, for OUT 4, reference clock can switch 174.703mhz or 698.812mhz.
Read More >>>